*

Energy Recovery Products

*

Search SEMCO

 

*
  • FV Series - Fresh Air Ventilator
  • Novel System Design
    • Efficient and economical design meeting the needs of the conventional HVAC market.
    • Compact, low profile design to conform to typical architectural requirements.
    • Easy access to all internal components through a large hinged access door and removable roof panel.
    • Outdoor air inlet and exhaust air outlet located at opposite ends of unit for maximum separation.
  • EXCLU-SIEVE® Energy Recovery Wheel
    • Certified total energy (both sensible and latent) recovery performance.
    • Patented 3Å molecular sieve desiccant coating to avoid cross contamination.
    • Easily removable wheel cassette module.
    • Surpasses NFPA-90A requirements having a smoke and flame spread rating of 0 and 0, vs. 50 and 25 allowed by the standard.
    • Self-adjusting air seals.
    • Acid resistant face coating.
  • Cabinet Construction
    • Galvanized steel cabinet construction with enamel finish.
    • Entire cabinet insulated to minimize energy loss.
    • Hinged doors for easy access.
    • Floor of the unit built as a pan to ensure watertight design.
  • Supply and Exhaust Air Fans
    • Sized for quiet and efficient operation.
    • Mounted and balanced.
    • Multiple motor/sheave selections for efficient adjustment of airflow.
  • Filter Sections
    • Filtration provided for both the outdoor air and return air.
  • Hoods & Dampers
    • Supply airflow balancing dampers.
    • Unit provided with an intake hood with a cleanable filter to limit rain and snow introduction.
    • Exhaust air back draft damper on outside units only.
  • Electrical Package with Single Point Connection
    • All motors wired to starters.
    • Accepts contact inputs for supply fan start/stop, wheel start/stop and unit start/stop.
    • Multiple options on input voltage to units:
FV-600
  208, 240V 1Ø
208, 240, 480V 3Ø
FV-1000
  208, 240V 1Ø
208, 240, 480V 3Ø
FV-2000
  208, 240V 1Ø
208, 240, 480V 3Ø
FV-3000
  208, 240V 1Ø
208, 240, 480V 3Ø
FV-4000
  208, 240V 1Ø
208, 240, 480V 3Ø
FV-5000
  208, 240V 1Ø
208, 240, 480V 3Ø
FV-7500
  208, 240, 480V 3Ø
FV-9000
  208, 240, 480V 3Ø

 

 

  • AQFlow® Airflow Measuring System
    • Simpler, more accurate system balancing in just five minutes.
    • Easy measuring and adjusting of outdoor and exhaust air quantities.
    • Accurate airflow (+/-6%) for the stand-alone FV unit or when mounted to a package rooftop unit where measuring outdoor air quantities is difficult.
    • Reduced calls to engineers regarding air quantities.
    • Peace of mind that proper ventilation is being provided to building occupants.
    • Quick detection of problems like dirty filters, motor failure, power outage, etc.
    • Meets intent of current and future ASHRAE standards for monitoring delivered fresh air quantities.
    • Airflow quantities can be displayed on AQFlow.
  • Electric Preheat (Optional)
    • An electric preheat coil can be provided to avoid frosting conditions for installations in cold climates, which have high indoor humidity design conditions.
  • Thermostat Frost Protection (Optional)
    • Thermostatic frost control allows the entire FV unit to be turned off at a predetermined temperature when electric preheat is not desired.
  • Control Package (Optional)
    • Stop/Jog Economizer allows the wheel to be stopped automatically during mild outdoor temperatures with periodic brief rotation to maintain the self-cleaning feature of the heat exchanger.
    • Wheel Frost Protection allows the wheel only to be stopped by the stop/jog economizer at a predetermined outdoor temperature in applications where a preheat coil or thermostat shut-off of the FV unit is not desired.
    • Sensor can provide an alarm signal indicating failure of the wheel rotation.

Product Library

Select a category 

1100 Peachtree Building (38 kB) pdf
Description: After 10 years, energy recovery still delivers for Atlanta building.

Coral Reef Yacht Club (66 kB) pdf
Description: Ventilation unit recovers energy while resolving smoking issues.

High-Performance Schools  (2248 kB) pdf
Description: High Marks for Energy Efficiency, Humidity Control, Indoor Air Quality & First Cost

Northville High School (36 kB) pdf
Description: Wheels turning for energy savings at high school.

Red Wing High School (117 kB) pdf
Description: Equipment earns high grades.

Redi-Floors Inc (57 kB) pdf
Description: An office-warehouse owner virtually eliminated tobacco smoke and controlled other contaminants by retrofitting his building's ventilation system. Here's what he did - and why.

Report Card on Humidity Control (2271 kB) pdf
Description: Failing Grade for Many Schools.

SEMCO Pioneers Indoor Environmentalism (116 kB) pdf

Wizard's Sports Cafe (55 kB) pdf
Description: Sports Bar/Restaurant Clears the Air.

  *
*
*
*
Feedback Questions and Comments?
© 2007 SEMCO Incorporated, a Fläkt Woods Company | Legal